Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

SeaLights build scanner (sl-build-scanner.jar) can be used to update build.gradle script with the changes needed to run your Gradle build using SeaLights Gradle plugin in a similar fashion , similarly as for Maven pom integration.

Note

Automatic integration of Sealights settings into your build.gradle script is currently supported only for Groovy language.
If your script is written in Kotlin, please use the method described in the following article: Gradle - Scanning Builds and Tests using Sealights plugin

Configuration file

Create a JSON configuration file with the following parameters to provide the necessary configuration fields to the SeaLights Gradle plugin:

  1. token or tokenFile - set with a token or a file containing the token obtained from the SeaLights dashboard

  2. Managing the session ID

    1. If you create a Build Session ID externally, provide the following fields:

      1. buildSessionId or buildSessionIdFile - Set with a build session id or a file containing the build session id created by the config step

      2. createBuildSessionId - Set to false

    2. If you want to create a Build Session ID using the SeaLights Gradle plugin, provide the following fields:

      1. createBuildSessionId - Set to true

      2. appName - Name of the application as you want to see it on the SeaLights dashboard

      3. branchName - Name of the branch as you want to see it on the SeaLights dashboard

      4. buildName - Name of the build as you want to see it on the SeaLights dashboard

      5. packagesIncluded - Comma-separated list of packages to include in the scan operation. Note: This is defining a subset, so it must include the star to include all sub-packages/classes

    3. If you want to create a Pull Request Build Session ID using the SeaLights Maven plugin, provide the following fields:

      1. createPRBuildSessionId - Set to true

      2. appName - Name of the application as you want to see it on the SeaLights dashboard

      3. targetBranch - The branch to which this PR will be merged (already reported to SeaLights)

      4. pullRequestNumber - The number assigned to the Pull Request from the source control

      5. latestCommit - The full SHA of the last commit made to the Pull Request

      6. repositoryUrl - The pull request URL for the PR to be scanned up until the section before the pullRequestNumber value

      7. packagesIncluded - Comma-separated list of packages to include in the scan. Note: This is defining a subset, so it must include the asterisk to include all sub-packages/classes

      8. packagesExcluded - (Optional) Comma-separated list of packages to include in the scan.  Note: This is defining a subset, so it must include the asterisk to include all sub-packages/classes

  3. executionType - Provide which executions need to be handled by the Gradle plugin

    1. full - Execute both the build scanner and the test listener

    2. scanonly - Execute only the build scanner

  4. testTasksAndStages - (Optional) Mapping of test tasks’ names to test stage names as they will be displayed on the SeaLights dashboard. It should be of the format {"testTask1":"testStage1", "testTask2":"testStage2"}

  5. proxy - (Optional) Address of proxy to run connection through

...

Code Block
languagejson
{
  "executionType": "fullscanonly",
  "tokenFile": "./sltoken.txt",
  "createBuildSessionId": true,
  "appName": "${System.getenv('JOB_NAME')}",
  "branchName": "master",
  "buildName": "${System.getenv('BUILD_NUMBER')}",
  "packagesIncluded": "*com.example.*",
  "packagesExcluded": "",
  "filesIncluded": "*.class",
  "filesExcluded": "*test-classes*",
  "recursive": true,
  "includeResources": true,
  "testTasksAndStages": {"test":"Unit Tests", "junitPlatformTest":"Unit Tests", "integrationTest":"Integration Tests"},
  "labId": null,
  "logEnabled": false,
  "logDestination": "console",
  "logLevel": "off",
  "logFolder": "/tmp",
  "gradleProjectConfig": {
    "excludedProjects": ["subProject1", "subProject2"],
    "repoConfig": "mavenLocal()"
  }
}

...

Note
  • Do not call the JSON file 'sealights.json' as the agent uses this file name for override options

  • For troubleshooting purpose,  you can use "buildName":"SL_Timestamp" in your JSON file to have the Sealights Gplugin generating automatically a time stamp (yyyy.MM.dd-hh.mm format) as a default buildname

Integrating into the Build.gradle script

Before running your Gradle build, you run the build scanner with -gradle flag to integrate the SeaLights Gradle plugin into the build.gradle file. This will create a sealights.gradle script with all the configuration taken from the JSON config file and append a reference to it in build.gradle.

The standard parameters the build scanner receives are:

  • configfile - The path to the JSON configuration you created with the parameters to be provided to the SeaLights Gradle plugin

  • workspacepath - The base path to the location of the build.gradle file to update

Code Block
languagebash
java -jar sl-build-scanner.jar -gradle -configfile sl-config.json -workspacepath .

...

Note

This step will update the root build.gradle file and back it up to build.gradle.slbackcopy in the same directory
If your workspace is not reset for each build, you will need to restore them at the end of the run (see command below).

Next The next step is to run your regular Gradle build command, e.g. gradle clean buildbuild’.

Restoring the build.gradle file to its previous state

In case If the project is to be restored to its previous state before the SeaLights plugin was applied, use the build scanner with the -restoreGradle flag on the workspace where the gradle.build file is located:

...

This command will (1) restore gradle.build from its backup, (2) delete the backup file, and (3) delete the sealights.gradle file. 
Failure at any of these steps won’t prevent the next ones , so that the project is restored as much as possible.

Configuring

...

SCM to enable links from the dashboard

SeaLights, by default, provides all links to the SCM for Github. You can configure SeaLights to prepare the links for Bitbucket and Gitlab as well with the following parameters placed under the sealightsJvmParams section:

  • sl.scm.provider - set to github, Bitbucket or gitlab

  • sl.scm.baseUrl - When working with an on-premise installation of your SCM and access from the build machine is different than the one accessed by the users, then you can provide the base URL to use

  • sl.scm.version - set to the version of the on-premise version you use

Code Block
"sealightsJvmParams": {
    "sl.scm.provider": "bitbucket",
    "sl.scm.baseUrl": "https://my.bitbucket.com/projects/ABCD/repos/XYZ/browse/A1",
    "sl.scm.version": "4.9.0"
}

Pre-downloading the agents

The Gradle plugin downloads the recommended agent at the beginning of the run. If you want to pre-download them and provide them to the plugin, you can do so with the flags scannerJarlistenerJar.

...

Code Block
"scannerJar": "./sl-build-scanner.jar"
"listenerJar": "./sl-test-listener.jar"

Using a local repo

The Gradle plugin, by default, is downloaded from Maven Central. If you want to update the repo it downloads from, you can do so using the gradleProjectConfig->repoConfig option

As repo configurations are ussuslly usually multiline, its important to maintain this new line format using \n

Code Block
"gradleProjectConfig": {"repoConfig": "maven{\nurl \"https://artifactory.company.com/artifactory/remote-repos\"\ncredentials {\nusername = \"USERNAME\"\npassword = \"PASSWORD\"\n}\n}"}

...

Samples

Table of Contents
minLevel2
maxLevel6
outlinefalse
typelist
printablefalse

Shell script 

Info

This script is very often added to a new pre-build step in your CI configuration (i.e. Jenkins).

Code Block
languagebash
echo "Downloading Sealights Agents..."
wget -nv https://agents.sealights.co/sealights-java/sealights-java-latest.zip
unzip -o sealights-java-latest.zip
echo "Sealights agent version used is:" `cat sealights-java-version.txt`

echo  '{ 
    "executionType": "scanonly",
    "tokenFile": "sltoken.txt", 
    "createBuildSessionId": true,
    "appName": "${System.getenv(\"JOB_NAME\")}",   
    "branchName": "${System.getenv(\"GIT_BRANCH\")}",
    "buildName": "SL_Timestamp",
    "packagesIncluded": "*com.example.*",   
    "packagesExcluded": "",
    "filesIncluded": "*.class",
    "filesExcluded": "*test-classes*",
    "recursive": true,
    "includeResources": true,
    "proxy": null,
    "logEnabled": false,
    "logDestination": "console",
    "logLevel": "off",
    "logFolder": "/tmp/sl-logs",
    "scannerJar": "./sl-build-scanner.jar",
    "listenerJar": "./sl-test-listener.jar",
    "sealightsJvmParams": {
      "sl.scm.provider": "bitbucket"
    }
  }' > sl-configgradle-build.json
 
echo "Updating Build.gradle with Sealights..."
java -jar sl-build-scanner.jar -gradle -configfile sl-configgradle-build.json -workspacepath .

Next step is to run your regular Gradle build command, e.g. gradle clean build.

Gitlab YML

Info

In the example below:

  • Make sure you have defined a $SEALIGHTS_AGENT_TOKEN masked variable in your Gitlab settings with a value from your Account’s settings page (Agent Token section).

  • You have updated the packagesincluded value defined at line 16 to the relevant one form your repository.

Code Block
languageyaml
build:
  stage: build
  before_script:
    - echo "Downloading Sealights Agents..."
    - wget -nv https://agents.sealights.co/sealights-java/sealights-java-latest.zip
    - unzip -o sealights-java-latest.zip
    - echo "Sealights agent version used is:" `cat sealights-java-version.txt`
    - >
      echo  '{ 
      "executionType":"scanonly",
      "token":"'$SEALIGHTS_AGENT_TOKEN'",
      "createBuildSessionId":true,
      "appName":"'$CI_PROJECT_NAME'",   
      "branchName":"'$CI_COMMIT_BRANCH'", 
      "buildName":"'$CI_PIPELINE_ID - $CI_JOB_STARTED_AT'", 
      "packagesIncluded":"*com.mycompany.*",
      "sealightsJvmParams": {
          "sl.scm.provider": "gitlab",
          "sl.scm.baseUrl": "'${CI_SERVER_URL}/${CI_PROJECT_PATH}'/blob" }
      }' > sl-plugin-settings.json
    - cat sl-plugin-settings.json
    - echo "Updating Gradle with Sealights..."
    - java -jar sl-build-scanner.jar -gradle -configfile sl-plugin-settings.json -workspacepath .

The rest of your pipeline is unchanged.

Page Properties
hiddentrue


Related issues